The antenna as a transducer: simple circuit and electromagnetic models
MetadataShow full item record
CitationSEVGİ, L. (2007). The antenna as a transducer: simple circuit and electromagnetic models. IEEE Antennas and Propagation Magazine, 49 (6), pp. 211-218. https://dx.doi.org/10.1109/MAP.2007.4455907.
Antennas are key elements in electrical engineering. They are the first and most essential parts of a communication/radar system, and basic instruments for electromagnetic compatibility (EMC) tests and measurements. A good design for a transmitting or receiving antenna system or array may reduce the installation and operating costs more than 30-50%. Moreover (up to a certain extent), noise and interference may be eliminated at the front end of the receivers. A communication or radar antenna system basically covers narrow operating bands and operates in the far field. On the other hand, EMC antennas operate over broad bands and use near fields. This tutorial aims to discuss some aspects of these very well-known devices that are often neglected or forgotten, because of their simplicity.
SourceIEEE Antennas and Propagation Magazine
Showing items related by title, author, creator and subject.
An antenna is calibrated in an open-field test site (OFTS) and/or an anechoic chamber, which facilities themselves need calibration. The procedures for calibrated test sites (CALTS) are given in the CISPR and ANSI/IEEE ...
Yıldırım, Bahadır Süleyman (IEEE, 2010)A compact, small, low-profile, planar, multi-band, low-cost, and easy to manufacture WCDMA antenna with 5 GHz WLAN functionality has been presented. Low-cost FR-4 dielectric loading technique has been implemented to achieve ...
Open-area test site (OATS) calibration is discussed in this tutorial. The calibration is performed according to the CISPR and ANSI/IEEE standards. First, theoretical calculations of the normalized-site-attenuation (NSA) ...