Browsing by Author "İbrahim, Muhammed A."
Now showing items 1-14 of 14
-
A 22.5 MHz current-mode KHN-biquad using differential voltage current conveyor and grounded passive elements
İbrahim, Muhammed A.; Minaei, Shahram; Kuntman, Hakan (Elsevier, 2005-07)In this paper, a current-mode (CM) Kerwin-Huelsman-Newcomb (KHN) biquad is proposed. The circuit employs three differential-voltage current conveyors (DVCCs) as active elements together with two capacitors and four resistors ... -
All - pass sections with high gain opportunity
İbrahim, Muhammed A.; Minaei, Shahram; Yüce, Erkan (Radioengineering Society, 2011-04)In this paper, two new circuits for realizing firstorder voltage-mode (VM) all-pass section (APS) with variable gain are presented. The first proposed filter uses a single differential difference current conveyor (DDCC), ... -
All-pass section with high gain opportunity
İbrahim, Muhammed A.; Minaei, Shahram; Yüce, Erkan (Asszisztencia Szervezo Kft., 2010-08)In this paper, a new circuit configuration for realizing voltage-mode (VM) all-pass section (APS) is presented. The circuit is cascadable with other VM circuits because of its high input and low output impedances. It ... -
All-pass sections with rich cascadability and IC realization suitability
İbrahim, Muhammed A.; Minaei, Shahram; Yüce, Erkan (Wiley, 2012-05)In this paper, two new circuit configurations for realizing voltage-mode (VM) all-pass sections (APSs) are presented. The proposed circuits employ only two differential voltage current conveyors (DVCCs) and are cascadable ... -
DVCC based current-mode first-order all-pass filter and it's application
Minaei, Shahram; İbrahim, Muhammed A.; Kuntman, Hakan (IEEE, 2003-12-14)In this paper, a new realisation of DVCC based current mode all-pass filter circuit is proposed. This circuit employs only one active element and three passive elements of which two are grounded. Using the proposed filter ... -
DVCC based differential-mode all-pass and notch filters with high CMRR
İbrahim, Muhammed A.; Minaei, Shahram; Kuntman, Hakan (Taylor & Francis, 2006-08-19)Civilizations tend to fail, or gain antagonistic characteristic, not necessarily as a consequence of their inherent specificities, but also because of their interaction with other civilizations. which have not attained ... -
General configuration for realizing current-mode first-order all-pass filter using DVCC
Minaei, Shahram; İbrahim, Muhammed A. (Taylor & Francis, 2005)In this paper, a new general configuration for realizing current-mode all-pass filter circuits using differential voltage current conveyor (DVCC) is proposed. The proposed configuration is composed of a DVCC and five passive ... -
Lossy / lossless floating / grounded inductance simulation using one DDCC
İbrahim, Muhammed A.; Minaei, Shahram; Yüce, Erkan; Herencsar, Norbert; Koton, Jaroslav (Radioengineering Society, 2012-04)In this work, we present new topologies for realizing one lossless grounded inductor and two floating, one lossless and one lossy, inductors employing a single differential difference current conveyor (DDCC) and a minimum ... -
A mixed - mode KHN - biquad using DVCC and grounded passive elements suitable for direct cascading
Minaei, Shahram; İbrahim, Muhammed A. (John Wiley & Sons, 2009-09)In this paper a mixed-mode (input and output signals can be current or voltage) Kerwin-Huelsman-Newcomb (KHN) biquad with low/high input impedance and high/low output impedance depending on the type of the corresponding ... -
New CMOS configurations for current-controlled conveyors (CCCIIs)
Minaei, Shahram; Kaymak, Deniz; İbrahim, Muhammed A.; Kuntman, Hakan (IEEE, 2002)In this paper two new CMOS configurations for current-controlled conveyor (CCCII) are proposed. The proposed circuits provide good linearity, very high input impedance at port-y, high output impedance at port Z and good ... -
A new current-mode KHN-biquad using differential voltage current conveyor suitable for if stages
Minaei, Shahram; İbrahim, Muhammed A.; Kuntman, Hakan (IEEE, 2003-07-01)In this paper, a new current-mode (CM) Kerwin-Huelsman-Newcomb (KHN) biquad is proposed. The proposed circuit employs three differential difference current conveyors (DVCCs) as active elements together with two capacitors ... -
A new DVCC-based fully cascadable voltage-mode full-wave rectifier
İbrahim, Muhammed A.; Yüce, Erkan; Minaei, Shahram (Springer Verlag, 2016-12)In this paper, a new voltage-mode (VM) full-wave rectifier circuit employing two plus-type differential voltage-current conveyors, two grounded resistors, and two diodes is proposed. The proposed full-wave rectifier enjoys ... -
A new simulation of mutually coupled circuit based on CCIIs
Yüce, Erkan; Minaei, Shahram; İbrahim, Muhammed A. (Taylor & Francis, 2007-04-05)In this paper, a new circuit for simulating a mutually coupled circuit is presented. The circuit employs four second-generation current conveyors (CCIIs) as active elements, together with five resistors and two grounded ... -
A novel full-wave rectifier/sinusoidal frequency doubler topology based on CFOAs
Yüce, Erkan; Minaei, Shahram; İbrahim, Muhammed A. (Springer, 2017-11)A novel topology for realizing voltage-mode (VM) full-wave rectifier/sinusoidal frequency doubler based on current feedback operational amplifiers (CFOAs) and n-channel metal-oxide semiconductor (NMOS) transistors is ...