High - slew rate low - quiescent current rail - to - rail CMOS buffer amplifier for flat panel displays
Üst veriTüm öğe kaydını göster
KünyeYıldız, M., Minaei, S., & Arslan, E. (2011). High - slew rate low - quiescent current rail - to - rail CMOS buffer amplifier for flat panel displays. Journal of Circuits, Systems and Computers, 20(7), 1277-1286. http://dx.doi.org/10.1142/S0218126611007888
This work presents a high-slew rate rail-to-rail buffer amplifier, which can be used for at panel displays. The proposed buffer amplifier is composed of two transconductance amplifiers, two current comparators and a push-pull output stage. Phase compensation technique is also used to improve the phase margin value of the proposed buffer amplifier for different load capacitances. Post-layout simulations of the proposed buffer amplifier are performed using 0.35 mu m AMS CMOS process parameters and 3.3V power supply. The circuit is tested under a 600 pF capacitive load. An average settling time of 0.85 mu s under a full voltage swing is obtained, while only 3 mu A quiescent current is drawn from the power supply. Monte Carlo analysis is also added to show the process variation effects on the circuit.