Antenna calibration for EMC tests and measurements
Üst veriTüm öğe kaydını göster
KünyeSEVGİ, L., ÇAKIR, S., ÇAKIR, G. (2008). Antenna calibration for EMC tests and measurements. IEEE Antennas and Propagation Magazine, 50 (3), pp. 215-224. http://dx.doi.org/10.1109/MAP.2008.4563616.
An antenna is calibrated in an open-field test site (OFTS) and/or an anechoic chamber, which facilities themselves need calibration. The procedures for calibrated test sites (CALTS) are given in the CISPR and ANSI/IEEE standards. The characteristic parameter for calibrated test sites is the normalized site attenuation (NSA). Theoretical calculations and practical measurements of normalized site attenuation are first presented. Antenna-factor (AF) and/or absolute-gain measurement methods are then reviewed. Finally, an alternative antenna calibration approach is given in this tutorial.
KaynakIEEE Antennas and Propagation Magazine
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
Sevgi, Levent (IEEE, 2007-12)Antennas are key elements in electrical engineering. They are the first and most essential parts of a communication/radar system, and basic instruments for electromagnetic compatibility (EMC) tests and measurements. A good ...
Loop-antenna calibration is discussed in this tutorial. Loop antennas are especially used in low-frequency radiated-emission (RE) and radiated-susceptibility (RS) measurements and tests. These are important in commercial ...
Open-area test site (OATS) calibration is discussed in this tutorial. The calibration is performed according to the CISPR and ANSI/IEEE standards. First, theoretical calculations of the normalized-site-attenuation (NSA) ...